{"product_id":"cap-heat-press","title":"Cap \u0026 Patch Heat Press — CP2815-3 Pro","description":"\u003cp\u003e\u003cstrong\u003eA flat press cannot do caps.\u003c\/strong\u003e A curved crown needs a curved platen and heat from\nboth sides, which is the whole reason this machine exists. If hats are part of what your program\nsells, this is not an upgrade to the shirt press — it is a different tool.\u003c\/p\u003e\n\n\u003ch3\u003eBoth platens heat, and you set each temperature\u003c\/h3\u003e\n\u003cp\u003eMost cap presses heat from the top only. Some advertise a heated lower platen that turns out to\nbe \u003cem\u003eheat assist\u003c\/em\u003e — it borrows warmth from the top, so you run a throwaway press first to\nbuild it up. That is an extra cycle on every single hat.\u003c\/p\u003e\n\u003cp\u003eOn this press the \u003cstrong\u003etop and bottom platens are independently temperature controlled\u003c\/strong\u003e.\nSet each one, start working. On a structured cap with a stiff front panel, real heat from below is\nwhat releases the transfer cleanly on the first press — not the second.\u003c\/p\u003e\n\u003cp\u003eIt \u003cstrong\u003eopens automatically\u003c\/strong\u003e at the end of the cycle, so a cap cannot cook because\nsomeone turned away.\u003c\/p\u003e\n\n\u003ch3\u003eLaser alignment, included\u003c\/h3\u003e\n\u003cp\u003eA projected guide shows exactly where the transfer will land, which matters more on a cap than\nanywhere else — you cannot eyeball center on a curved crown, and a crooked logo on a hat is\nobvious from across a room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn premium equipment this is a several-hundred-dollar add-on.\u003c\/strong\u003e It is standard\nhere, and on our \u003ca href=\"\/products\/dual-platen-heat-press\"\u003edual platen press\u003c\/a\u003e as well.\u003c\/p\u003e\n\n\u003ch3\u003eThe pads are the part that matters\u003c\/h3\u003e\n\u003cp\u003eA cap press is only as good as the pad under the hat, and hats are not one shape. This ships\nwith two:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-panel with a middle seam\u003c\/strong\u003e — Richardson 112, baseball caps, hip-hop\n  styles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2- or 6-panel with a sharp corner\u003c\/strong\u003e — INIVI, driver caps and similar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBetween them they cover most of what a school store or a booster club actually orders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoth pads are included in the price\u003c\/strong\u003e, along with two soft silicone pads and an\nattachment for the second hat pad. Nothing here is an add-on — you are not going to unbox this and\nfind your Richardson 112s need a pad you did not know to order.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlaten:\u003c\/strong\u003e 3.7″ × 7″ molded, one size fits all cap sizes. Upper and lower\n  heated, independently controlled\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax temperature:\u003c\/strong\u003e 450°F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e touch-screen LCD, multi-timer to 999 seconds, auto standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 110V, \u003cstrong\u003e600W\u003c\/strong\u003e — about 5 amps, so a normal wall outlet\n  runs it\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMachine:\u003c\/strong\u003e 17.7″ × 10.6″ × 17.7″, \u003cstrong\u003e44 lb\u003c\/strong\u003e — it sits on a\n  desk\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping:\u003c\/strong\u003e 57 lb, ships parcel — no freight, no liftgate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne platen covers every cap size.\u003c\/strong\u003e The molded shape transitions between sizes\nwithout swapping anything, and a fixed hook plus silicone pad holds the cap square so the print\ndoes not go on crooked.\u003c\/p\u003e\n\n\u003ch3\u003eTwelve month warranty\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTwelve months, and we handle it.\u003c\/strong\u003e A lot of this equipment is sold with six. If\nsomething fails you call Lawrenceville and speak to people who press garments themselves, rather\nthan opening a ticket with a distributor who has never run the machine.\u003c\/p\u003e\n\n\u003ch3\u003eIt arrives branded\u003c\/h3\u003e\n\u003cp\u003eEvery press we ship carries the \u003cstrong\u003eMoreTranz logo\u003c\/strong\u003e. Not vanity — it puts the name\nand number of whoever supports the machine \u003cem\u003eon\u003c\/em\u003e the machine. The booster volunteer three\nyears from now, who was not there when it was bought, can see who to call.\u003c\/p\u003e\n\n\u003ch3\u003ePatches too\u003c\/h3\u003e\n\u003cp\u003eThe same press applies embroidered and woven patches to bags, jackets and uniform sleeves, which\nis worth knowing before you buy a second machine for it.\u003c\/p\u003e\n\n\u003ch3\u003eSchools, districts and booster clubs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWe quote for requisitions.\u003c\/strong\u003e Email us what you need and we will send a quote you\ncan attach to a purchase order, with a firm total — freight included, not \"call for a shipping\nquote\". A bookkeeper cannot submit a requisition against a number that might move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet 30\u003c\/strong\u003e once your district has us set up. Georgia public schools and colleges\nare \u003cstrong\u003eautomatically exempt from sales tax\u003c\/strong\u003e and need no form from us; booster clubs and\nother 501(c)(3) groups are exempt once we have your ST-5 on file.\u003c\/p\u003e\n\u003cp\u003eOur invoices read \u003cstrong\u003eMorché Designs dba MoreTranz\u003c\/strong\u003e — the name already in several\nGeorgia vendor systems, which is usually the slowest part of buying anything.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"mailto:info@moretranz.com?subject=Heat%20press%20quote%20for%20purchase%20order\"\u003eRequest a quote for a requisition\u003c\/a\u003e\nor call \u003cstrong\u003e470-738-8300\u003c\/strong\u003e.\u003c\/p\u003e","brand":"MoreTranz","offers":[{"title":"Default Title","offer_id":49155903750399,"sku":"CP2815-3","price":960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/1508\/0703\/files\/CP1815-3-111.webp?v=1788821270","url":"https:\/\/moretranz.com\/products\/cap-heat-press","provider":"Transfers by MoreTranz","version":"1.0","type":"link"}