Before You Press

For best results: use accurate time, temperature and pressure. High-quality results start with the right settings.

  • Preheat the garment 2–5 seconds to remove moisture.

  • Verify your heat press reaches the correct temperature.

  • Apply firm, even pressure across the entire transfer.

  • Test unfamiliar garments before full production.

TrueColor® and TrueColor® MAX transfers are HOT peel!

DTF Transfers

  • 100% Cotton and Blends

    • Temperature: 300°F
    • Time: 15 seconds
    • Pressure: medium–firm
    • Peel: hot
    • Repress: 3 seconds with parchment paper
  • 100% Polyester, Nylon & Spandex

    • Temperature: 260°F
    • Time: 15 seconds
    • Pressure: firm
    • Peel: hot
    • Repress: 3 seconds with parchment paper

TrueColor® Glitter transfers are COLD peel!

Glitter Transfers

  • 100% Cotton and Blends

    • Temperature: 315°F
    • Time: 15 seconds
    • Pressure: medium–firm
    • Peel: cold. Let it cool, then rub the back with a cloth or Teflon pad to remove any remaining heat
    • Repress: 5 seconds with parchment paper
  • 100% Polyester or Spandex

    • Temperature: 315°F
    • Time: 15 seconds
    • Pressure: medium–firm
    • Peel: cold. Let it cool, then rub the back with a cloth or Teflon pad to remove any remaining heat
    • Repress: 5 seconds with parchment paper

Spangle transfers are COLD peel!

Spangle Transfers

  • All Fabrics

    • Temperature: 300°F
    • Time: 15 seconds
    • Pressure: medium–firm
    • Peel: cold. Let the transfer cool completely before removing the carrier
    • Repress: 5 seconds with parchment paper

UV DECALS ARE PERMANENT  – PLEASE BE VERY CAREFUL WITH PLACEMENT!

UV DTF Decals

UV DTF Decals can be applied to: Glass, metal, plastic, ceramics, wood, leather, paper, cardboard.

  • Application Instructions

    1. Clean the surface. On nonporous surfaces, use rubbing alcohol or window cleaner with a lint-free cloth.
    2. Burnish the transfer firmly onto the carrier film, using a squeegee, credit card or your fingertip.
    3. Peel away the backing paper.
    4. Position the decal. Line it up before it touches, because it can't be repositioned.
    5. Burnish firmly to remove air bubbles.
    6. Slowly peel away the transfer film.

    Not recommended for car windows due to heat buildup.

Follow your blank's settings

Sublimation Transfers

Every sublimation blank is different. Always follow the blank manufacturer's recommended temperature, time, pressure and paper removal.