Request a quote
We sell presses on quote rather than through the cart. Tell us which machine and where it is going, and you get a written quote with a firm total — freight included, not "call for a shipping quote".
That is what a school or booster club needs to raise a requisition, and it is how these sell anyway. We invoice Net 30 once your district has us set up, and our invoices read Morché Designs dba MoreTranz.
Request a quote by email or call 470-738-8300.
Freight is a flat fee to the lower 48 with liftgate included. Alaska, Hawaii and US territories are quoted individually. The pickup estimate above applies to transfers, which we print here — not to machines.
Lower Platens for Heat Presses
The platen is what decides whether a job is easy or awkward. A full-size platen is wrong for a sleeve, a youth shirt or a neck label — you end up fighting the garment and pressing creases into it. These change tool-free in seconds.
They fit both of our presses
Every platen here works on the 16″ × 20″ clamshell and the dual platen press. Buy them once. If you start on the clamshell and add the dual platen later, nothing is stranded.
Which one you need
- Sleeves — sleeve hits and numbers, without dragging the body of the shirt through the press.
- Youth Shirt — a full front on a youth garment without pressing the seams.
- Label — neck labels and left-chest logos.
- Tag Along — see below. This is the one to read about.
- Hat Bill, Round, Shoes, Can Cooler, Pant Leg — shapes a flat platen simply cannot reach.
Tag Along does two prints in one press
It has a separate raised area that lets you pull the back neck of the garment around to the front, so the front chest design and the printed neck tag press together.
That halves the press count on any tagged garment. A 200-shirt run with printed neck tags is 400 presses on a normal platen and 200 on this one. It is also the upgrade that makes spiritwear look bought rather than made — replacing the blank's manufacturer tag with a school tag is cheap, and most programs skip it only because it doubles the work.
Teflon protective covers
Most of these have a matching Teflon Teflon cover. Shoes and Round do not — their shapes have no cover made for them. Check the cover listing before you order if you want the pair.
The rest of the heat press range
- 16″ × 20″ dual platen press — the volume machine, still a one-person station. Load one side while the other presses.
- 16″ × 20″ clamshell press — the everyday press for flat goods, with a slide-out base you thread the shirt onto.
- Cap and patch press — hats, beanies and patches. Upper and lower platens set separately, which is what a curved seam needs.
- Teflon platen covers — the cheapest thing you can do to make a platen last.
- Equipment cart — rolling, and the deck cranks from 15″ to 35.5″ for standing or seated work.
Not sure which press? Compare all three side by side, or press one yourself at our Lawrenceville shop.
Schools, districts and booster clubs
We quote for requisitions. Email us what you need and we will send a quote you can attach to a purchase order, with a firm total — freight included, not "call for a shipping quote". A bookkeeper cannot submit a requisition against a number that might move.
Net 30 once your district has us set up. Georgia public schools and colleges are automatically exempt from sales tax and need no form from us; booster clubs and other 501(c)(3) groups are exempt once we have your ST-5 on file.
Our invoices read Morché Designs dba MoreTranz — the name already in several Georgia vendor systems, which is usually the slowest part of buying anything.
Request a quote for a requisition or call 470-738-8300.
